Alpha Awning Cable Guide

Turnils_Alpha Cable Guide.jpg

A great contemporary straight drop option for sun/UV protection, air flow & where channels are not suitable.

The cables are high tensile 2.5mm 316 grade marine stainless steel, making them perfect for coastal applications.

Bottom Rail End Caps

By floating in and out of the bottom rail the awning operates smoothly without putting pressure on the cable.

Alpha Awnings proven to reduce cooling energy costs by up to 60%*. Alpha Awnings have been independently tested & proven to significantly reduce cooling energy costs by keeping a standard* home at a consistent & comfortable temperature throughout the summer months.

 

With an Alpha Awning on your home it will reflect heat, keep interiors cool and reduce energy costs by up to:

 

Perth: 48%

Melbourne: 13%

Sydney: 44%

Brisbane: 58%

Cairns: 47%

 

Adelaide: 35%

Canberra 35%

Coffs Harbour: 60%

Rockhampton: 48%

Darwin: 34%

Under European Standard ‘EN 13561 External blinds – Performance requirements including safety’, Alpha Awnings will meet wind ratings of up to Class 2 – wind speed of up to 29-38km/hr (equivalent to 5 on Beaufort scale) – depending on model no. and size.

NOTE: These results will only be achieved provided the awning is built and installed with Hunter Douglas components according to the Manufacturer’s specifications (as stated in the component book) and with a fabric according to the above standard. It is recommended that all awnings be retracted during wet or windy conditions. Refer to our manufacturer’s guide for full limitations, width, projection and wind rating information.

Dimensions

Min Width: 1.00m

Max Width: 5.00m

Max Width per unit: 5.0m (3.5m for internal cord winch)

Operating Options

Bottom Rail Accessories

Headbox Options

Optional Accessories

Applications

Contact Us

338 Victoria Road
Rydalmere
NSW 2116 Australia

Customer Service Toll- Free: 1800 021 022
hdcustservice@hunterdouglas.com.au

© Copyright 2019 Hunter Douglas Limited [ABN 98 009 675 709], 02/2019.  ® TURNILS is a registered Trade Mark of Hunter Douglas Scandinavia AB. Merger is a registered trade mark of Hunter Douglas Limited. Dyneema is a registered Trade Mark of DSM IP Assets B.V. MERMET is a registered Trade Mark of Mermet S.A. NOTE: Warranty conditions apply.  Refer to turnils.com.au/downloads for details.